LUNA Rubber Marker base 5 ml

Rubber Base is a clear, versatile liquid consistency base designed as an undercoat for solids and color bases.

Marker Features:

• Precise application: controlled amount of product for even application.
• Economical: rational use of product without excessive expenditure.
• Speed of operation: natural pen-like holding motion for fast application.

Features of the base:

• Liquid consistency.
• Has an acidity of 3-4 pH.
• May cause a warm and burning sensation on injured and very thin nails (not on healthy nails).
• It is intended as a lining under hard materials and colored bases.
• Lamp power for drying the base - 36-48 W. The lamp must be original.
• Adhesion is 100% if the correct application technique is followed.
• Perfectly removable as a spilivaniya, and with the help of a liquid.
• Hypoallergenic and has a neutral odor.

Characteristics

Method of application of LUNA base

1. Removal. For the shape of the nail make a file or leave 2 mm long, which will be removed after leveling. Saw 220 grit pollinate without strong pressure on the nail from above, lifting the scales of the nail plate, or use a buff 100 grit. Manicure.
2. When working with removers, after working with them wash your hands with soap and water. Degrease the nail with Nail Prep LUNAmoon. We make two approaches. We use 4 wipes (1 wipe for 5 fingers). First approach: wipe the surface of the nail. Second approach: take an orange stick, put a napkin on it and wipe everything in the cuticle area and in the sinuses.
3. Apply Ultrabond LUNAmoon (optional). It is important to wipe the brush with a lint-free tissue before applying to remove excess material. Using a semi-dry brush, apply Ultrabond to 5 fingers. Wait 1 minute for it to soak into the nail plate.
4. Lining with BASE MARKER Rubber Base. Apply to the nail plate and dry in the lamp for 60 seconds. Wipe off the stickiness.
5. Cover and align any material for convenience colored base or gel for extension. Dry in the lamp for 120 seconds.
6. File the shape after alignment. This is necessary to form a thickness on the edge of the nail, which will hold the free edge.
7. If the nail was thin, it may curl, so be sure to file out 1 mm of the natural nail from the inside. In this case, the material will not peel off. If the material is hard and the nail is very soft, the nail itself will start to separate from the hard material from the free edge.
8. After filing, wipe off the stickiness and cover with a thin layer of gel-lacquer or camouflage base.
9. Cover with topcoat. Dry 120 seconds. After drying do not wipe with anything, because the shine may be lost.

Important: Do not leave the marker open. Close the cap tightly after use. Avoid UV/LED rays in the product. Store in a dark place away from direct sunlight.